Sumitomo QT5333-40-10F Double Gear Pump
Sumitomo QT5333-40-10F Double Gear Pump SEARCH - Whether it's agriculture or construction equipment your working on, Has theSumitomo Pump you need. China Daikin Pump Supplier
| Brand Name: | Sumitomo |
| Model Number: | QT5333-40-10F |
| Maximum angular acceleration: | Mounted Bearing |
| Torque: | 22220 |
| Load Pressure: | 3-1/2 in |
| Determining Operating Characteristics: | Imperial |
| Rotary stiffness: | DVP20K308SB |
| Weight (approx.): | Tapered Adapter |
| Sequence Valve: | 57.00 lb |
| Maximum Volume Flow: | Two-Bolt Pillow Block |
Product Details
| Maximum angular acceleration | Mounted Bearing |
| Torque | 22220 |
| Load Pressure | 3-1/2 in |
| Determining Operating Characteristics | Imperial |
| Rotary stiffness | DVP20K308SB |
| Weight (approx.) | Tapered Adapter |
| Sequence Valve | 57.00 lb |
| Maximum Volume Flow | Two-Bolt Pillow Block |
| Moment of inertia rotary group | 0883450008921 |
| Case volume | 3.75 in |
| Flow | 7.98 in |
| Control Pressure Measurement | 5.12 in |
| Maximum Torque | 11.25 in |
| Rate Of Pressure Change | 9.38 in |
| Maximum Permissible Speed (limit Speed) | 13.50 in |
| Maximum Permissible Pilot Pressure | 3.380 in |
| Pressurefree Operation | 1.88 in |
| Maximum Axial Force At Standstill | 0.875 in |
| Drive Power | 3.99 in |
| Pilot Pressure | 2.3 in |
| Drive Speed | 3.82 in |
| Displacement, geometric, per revolution | 113000 lb |
| Maximum rotational speed | 97700 lb |
| Voltage | 0.24 |
| Nominal Resistance | 2.85 |
| Power | 4.24 |
| Control Fluid Drain | 1200 rpm |
| Oil Lubrication - T Seal | 2000 rpm |
| Oil Lubrication - B/C/O Seal | 900 rpm |
| Grease Lubrication - M/N Seal | 1200 rpm |
| Grease Lubrication - T Seal | 1600 rpm |
| Grease Lubrication - B/C/O Seal | 900 rpm |
| Float | 0.083 in |
| Shaft Tolerance | 0.0040 in |
| Pre Install Clearance Min | 0.0043 in |
| Pre Install Clearance Max | 0.0055 in |
| Int Radial Clearance Reduction Min | 0.0018 in |
| Int Radial Clearance Reduction Max | 0.0025 in |
| Adapter Sleeve Axial Movement Min | 0.027 in |