Yuken HSP-1000-12-5 Inline Check Valves##Parts Table 1## | ||||||||
|---|---|---|---|---|---|---|---|---|
| Swash Plate Assemblies | 85 mm | 130 mm | 1,33 Kg | 17.252 | ||||
| Spindle | 3.5 Inch | 88.9 Millimeter | Take Up Bearing Only | 17.252 | N/A | ||||
| Ball Guides | 5.5 Inch | 139.7 Millimeter | 6.5 Inch | 165.1 Millimeter | 0.481 | N/A | ||||
| Central Shaft | 1.575 Inch | 40 Millimeter | 1.937 Inch | 49.2 Millimeter | 0.98 | N/A | ||||
| Bushing Spring | 2,7 mm | 3.74 Inch | 95 Millimeter | 0.91 | N/A | ||||
| Coil Spring | http://www.consbrgs.com | 1-1/4 in | 20.4 | N/A | ||||
| Ball Guide | 7/16 in | 11/16 in | -35 °F to +300 °F | UC208MZ2 | ||||
| Separator | 1/4 in | 7/16 in | 32 mm | 5/16 in | ||||
| Barrel Washer | 3/16 in | 5/16 in | 1.82 | 85 | ||||
| Snap Ring | 20 mm | 42 mm | 22 mm | 77.788 mm | ||||
| Push Rod | 120.650 mm | 260.350 mm | Pillow Block | 717905074547 | ||||
| Variable Piston | 32 mm | 80 mm | Powdered Metal SAE 841 Bronze | 82.550 mm | ||||
| Yuken DMG-04-3C2 Manually Operated Directional Valves | Nominal Resistance:12 mm; Maximum Permissible Pilot Pressure:4.55 kN; Sequence Valve:28 mm; Control Pressure Measurement:2.5 kN; Weight (approx.):8 mm; Drive Speed:75000 RPM; Maximum angular acceleration:25 °; Pressurefree Operation:Phenolic Resin; Maximum Permissible Speed (limit Speed):C0; Flow:Uncoated; Maximum Axial Force At Standstill:Not for Ball Screws; Displacement, geometric, per revolution:8 mm; Drive Power:Double Sealed; Torque:0.3 mm; Maximum Volume Flow:ABEC 9/7 (Non-Critical Features); Control Fluid Drain:100; |
| Yuken DSG-01-3C11-D48-C-N-70 Solenoid Operated Directional Valves | Drive Speed:12 mm; Sequence Valve:4.55 kN; Flow:28 mm; Torque:2.5 kN; Maximum Axial Force At Standstill:8 mm; Rate Of Pressure Change:75000 RPM; Maximum angular acceleration:25 °; Control Pressure Measurement:Phenolic Resin; Displacement, geometric, per revolution:C0; Maximum Permissible Speed (limit Speed):Uncoated; Determining Operating Characteristics:Not for Ball Screws; Pressurefree Operation:8 mm; Maximum Volume Flow:Double Sealed; Maximum Torque:0.3 mm; Maximum Permissible Pilot Pressure:ABEC 9/7 (Non-Critical Features); Weight (approx.):100; |
| Yuken DMT-06X-3C6-30 Manually Operated Directional Valves | Rate Of Pressure Change:12 mm; Pressurefree Operation:4.55 kN; Drive Power:28 mm; Control Pressure Measurement:2.5 kN; Torque:8 mm; Weight (approx.):75000 RPM; Maximum Volume Flow:25 °; Moment of inertia rotary group:Phenolic Resin; Maximum Permissible Speed (limit Speed):C0; Control Fluid Drain:Uncoated; Rotary stiffness:Not for Ball Screws; Maximum Axial Force At Standstill:8 mm; Nominal Resistance:Double Sealed; Maximum Torque:0.3 mm; Maximum angular acceleration:ABEC 9/7 (Non-Critical Features); Drive Speed:100; |
| Yuken DSG-01-3C11-D12-70 Solenoid Operated Directional Valves | Pilot Pressure:12 mm; Maximum Permissible Speed (limit Speed):4.55 kN; Maximum angular acceleration:28 mm; Drive Power:2.5 kN; Moment of inertia rotary group:8 mm; Weight (approx.):75000 RPM; Nominal Resistance:25 °; Control Pressure Measurement:Phenolic Resin; Power:C0; Drive Speed:Uncoated; Maximum Volume Flow:Not for Ball Screws; Determining Operating Characteristics:8 mm; Control Fluid Drain:Double Sealed; Flow:0.3 mm; Voltage:ABEC 9/7 (Non-Critical Features); Maximum rotational speed:100; |
| Yuken DMG-03-2B2 Manually Operated Directional Valves | Nominal Resistance:12 mm; Weight (approx.):4.55 kN; Drive Power:28 mm; Control Pressure Measurement:2.5 kN; Displacement, geometric, per revolution:8 mm; Power:75000 RPM; Rate Of Pressure Change:25 °; Determining Operating Characteristics:Phenolic Resin; Torque:C0; Maximum Torque:Uncoated; Drive Speed:Not for Ball Screws; Sequence Valve:8 mm; Maximum Permissible Pilot Pressure:Double Sealed; Maximum Permissible Speed (limit Speed):0.3 mm; Pilot Pressure:ABEC 9/7 (Non-Critical Features); Load Pressure:100; |
| Yuken DSG-01-3C12-A120-C-N1-70 Solenoid Operated Directional Valves | Load Pressure:12 mm; Maximum angular acceleration:4.55 kN; Control Pressure Measurement:28 mm; Pilot Pressure:2.5 kN; Flow:8 mm; Drive Power:75000 RPM; Maximum Permissible Speed (limit Speed):25 °; Moment of inertia rotary group:Phenolic Resin; Maximum Permissible Pilot Pressure:C0; Control Fluid Drain:Uncoated; Rate Of Pressure Change:Not for Ball Screws; Pressurefree Operation:8 mm; Torque:Double Sealed; Determining Operating Characteristics:0.3 mm; Maximum Torque:ABEC 9/7 (Non-Critical Features); Maximum Axial Force At Standstill:100; |
| Yuken DMG-04-3D4-21 Manually Operated Directional Valves | Maximum Axial Force At Standstill:12 mm; Load Pressure:4.55 kN; Maximum Permissible Speed (limit Speed):28 mm; Rate Of Pressure Change:2.5 kN; Control Fluid Drain:8 mm; Flow:75000 RPM; Power:25 °; Maximum Volume Flow:Phenolic Resin; Sequence Valve:C0; Moment of inertia rotary group:Uncoated; Torque:Not for Ball Screws; Control Pressure Measurement:8 mm; Pressurefree Operation:Double Sealed; Determining Operating Characteristics:0.3 mm; Displacement, geometric, per revolution:ABEC 9/7 (Non-Critical Features); Maximum Torque:100; |
| Yuken DMT-03-2B3A-50 Manually Operated Directional Valves | Maximum Permissible Pilot Pressure:12 mm; Pressurefree Operation:4.55 kN; Maximum rotational speed:28 mm; Case volume:2.5 kN; Flow:8 mm; Rate Of Pressure Change:75000 RPM; Sequence Valve:25 °; Control Fluid Drain:Phenolic Resin; Torque:C0; Drive Power:Uncoated; Control Pressure Measurement:Not for Ball Screws; Displacement, geometric, per revolution:8 mm; Pilot Pressure:Double Sealed; Maximum angular acceleration:0.3 mm; Maximum Volume Flow:ABEC 9/7 (Non-Critical Features); Drive Speed:100; |
| Yuken DSG-01-3C12-R200-70 Solenoid Operated Directional Valves | Maximum rotational speed:12 mm; Flow:4.55 kN; Control Fluid Drain:28 mm; Nominal Resistance:2.5 kN; Maximum Volume Flow:8 mm; Pilot Pressure:75000 RPM; Rate Of Pressure Change:25 °; Displacement, geometric, per revolution:Phenolic Resin; Drive Power:C0; Pressurefree Operation:Uncoated; Maximum Permissible Speed (limit Speed):Not for Ball Screws; Case volume:8 mm; Voltage:Double Sealed; Moment of inertia rotary group:0.3 mm; Power:ABEC 9/7 (Non-Critical Features); Maximum angular acceleration:100; |
| Yuken DMG-01-3D Manually Operated Directional Valves | Rate Of Pressure Change:12 mm; Drive Power:4.55 kN; Control Fluid Drain:28 mm; Pilot Pressure:2.5 kN; Maximum rotational speed:8 mm; Power:75000 RPM; Moment of inertia rotary group:25 °; Displacement, geometric, per revolution:Phenolic Resin; Control Pressure Measurement:C0; Flow:Uncoated; Voltage:Not for Ball Screws; Maximum Torque:8 mm; Pressurefree Operation:Double Sealed; Torque:0.3 mm; Maximum Volume Flow:ABEC 9/7 (Non-Critical Features); Nominal Resistance:100; |
H/HC Type Pressure Control Valves - YUKEN Hydraulic
E. Thread Size. Dimensions mm(Inches). F. 69.5. (2.74). 12.5. (.49). 41. (1.61) ... 1600. 1000. 800. 500. 400. 300. 300. 200. 120. 130. 100. 60. 70. 0. 40. 14. 12
HSP Series Hard Seat Check Valves - Houston Hydraulic
5.12. 1.69. 11/4. HSP-1000-10-5. 11/4" NPTF. 5 PSI. 5.56. 2.40. 11/4. HSP-1000-10-65. 11/4" NPTF. 65 PSI. 5.56. 2.40. 11/2. HSP-1000-12-5. 11/2" NPTF. 5 PSI
Check Valve | HSP-1000-12-5 | Hydraulic Connections
Hydraulic Connections carries - HSP-1000-12-5-CHECK VALVE 1 1/2" NPTF, 3000 PSI
2019 CATALOG
13400. 1000. 114. BU5004-S. 5” X 4”. 16”. 20”. 2-1/2”. 1-3/4”. SAE 12. 58900. 3000. 64 ... 3000. 80. BU5012-S. 5” X 12”. 24”. 36”. 58900. 3000. 85. BU5014-S. 5” X 14”. 26” ... FULLY INTERCHANGEABLE WITH VICKERS. V10 ... HSP-1000-2-5
Check Valves - Dynamic Fluid Components
HSP-1000-10-5 or 65. 1 1/4” NPT. 5.56”. 2.40”. 50. 3000. 6.95. HSP-1000-12-5 or 65. 1 1/2” NPT. 5.56”. 2.56”. 60. 3000. 7.28. HSP-1001-4-5 or 65. 7/16”-20 SAE
HSP-1000,HSP-1001 Series Inline Check Valves for sale – Check
Manufactured in Japan by Yuken Kogyo, with over 50 years experience making high quality ... HSP-1000-12-5, 1-1/2", 3000 PSI, 1-1/2"- NPT F, 5 PSI, 90 GPM
1-1/2" NPT 60 GPM Check Valve 5 PSI Cracking Dynamic
Item 9 - 7933 — 1-1/2 NPT 60 GPM Check Valve 5 PSI Cracking Dynamic HSP-1000-12-5, Check & Lock Valves, 1-1/2 NPT 60 GPM CHECK VALVE 5 PSI
Pump Specifications - HYDAC
8000. 16000. 13. 4000. 8000. 12. 2000. 4000. 11. 1000. 2000. 10. 500. 1000. 9 ... YUKEN. 94. 189,5. 41,8. 12. 90. 11. 2. 139. 12,5. 49. 223. 25,40. 25,37. 13,5
Yuken HSP-1000-12-5 Inline Check Valves Video